Mid Glamorgan

Heat load surveys and system design in Merthyr Tydfil

Heat load surveys and system design for homes in Merthyr Tydfil: room-by-room calculations, equipment selection and a written proposal, free with an installation quote.

  • from £365Local guide price
  • Survey 1–2 hoursTypical time
  • Mid GlamorganArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Merthyr Tydfil

Every Merthyr Tydfil quote starts with a room-by-room survey rather than a guess from floor area. Wet South Wales winters make a heat pump's quiet, even heating and dehumidifying mode useful well beyond summer.

For self-builds and extensions in Merthyr Tydfil, a standalone design pack can go straight to your builder. We cover Merthyr Tydfil as part of Mid Glamorgan, roughly 19 miles from Bridgend. We cover CF47 and the streets around them.

Prices in Merthyr Tydfil

In South and Mid Wales, our guide range for heat load surveys and system design is £365–£1,145 for a standalone design pack, including VAT. Labour rates in South and Mid Wales keep this slightly under the national middle. The design pack price depends mainly on the number of rooms and whether full drawings and equipment schedules are needed. Typical Design pack work (drawings and schedules for one home) lands around £365–£745 in this area.

Home survey

Free
inc VAT, South and Mid Wales guide

Free with an installation quote.

Balanced choice

Design pack

£365–£745
inc VAT, South and Mid Wales guide

Drawings and schedules for one home.

Self-build pack

£645–£1,145
inc VAT, South and Mid Wales guide

Whole-house design for a new build.

Planning and permissions

Wales removed its old 3 m boundary rule on 1 June 2026, so most houses in Merthyr Tydfil can now have an outdoor unit under permitted development if it meets the MCS 020a noise condition. Listed buildings still need consent, and conservation areas have extra restrictions.

The survey

At the survey we look at how each room is used, where the sun hits it and how the pipes can reach the outside wall, then put it all in a written quote. On a survey in Merthyr Tydfil the engineer looks at room size, glazing, the route for pipes and drains, the electrics and where the outdoor unit can sit quietly, then the written quote follows.

What is included

Every job in Merthyr Tydfil includes:

  • Pipe and drain routes
  • Equipment selection and outdoor unit sizing
  • Room-by-room heat gain and heat loss
  • Noise check to the nearest neighbour
  • Written proposal with options

Nearby

If you are just outside Merthyr Tydfil, we also work in Aberdare (4 miles), Tredegar (6 miles) and Rhondda (7 miles). See all services in Merthyr Tydfil or heat load surveys and system design across Mid Glamorgan.

FAQ

Common questions in Merthyr Tydfil

How much do heat load surveys and system design cost in Merthyr Tydfil?

Our guide range in South and Mid Wales is £365–£1,145 for a standalone design pack, including VAT. The exact price depends on the rooms, the pipe route and access, and we confirm it in writing after a free survey.

Who carries out the work in Merthyr Tydfil?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

Can I get a price for Merthyr Tydfil without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

How long does the installation take in Merthyr Tydfil?

Survey 1–2 hours. We confirm the timing, and any days with no cooling or heating, in your written quote.

Will the outdoor unit need planning permission in Merthyr Tydfil?

Since 1 June 2026, most houses in Wales can have an outdoor unit under permitted development if it meets the size, number and MCS 020a noise conditions. Flats, listed buildings and conservation areas need more care. We check on survey.

Why can't you just quote from floor area?

Two rooms the same size can need very different units because of glazing, orientation and use. Sizing from floor area alone is the main cause of systems that never feel right.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote