Derbyshire

Storage and electric heater replacement in Derby

Homeowners and landlords in Derby can book a free survey for storage and electric heater replacement, with a written quote setting out the equipment, the work and the price.

  • from £3,295Local guide price
  • Usually 2–4 daysTypical time
  • DerbyshireArea
Storage and electric heater replacement in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Storage and electric heater replacement in Derby

Summer peaks in the East Midlands make bedrooms under the roof the hardest rooms to keep comfortable. Old storage heaters in Derby homes are removed and recycled as part of the replacement.

Flats and bungalows in Derby that have never had gas are the usual candidates for replacing storage heaters. As well as Derby itself, our Derbyshire coverage takes in Chesterfield, Long Eaton and the towns around them. Coverage includes DE1.

Prices in Derby

Storage and electric heater replacement in Derby typically comes in at £3,295–£10,045 for 3–5 rooms including VAT, based on East Midlands rates. That sits a little below the UK middle, reflecting typical East Midlands labour rates. Quotes move with the length of the pipe run, where the outdoor unit can sit and how much electrical work the job needs. As an example, the Bungalow or house option (four rooms on one outdoor unit) would typically be £4,745–£7,645 here.

Small flat

£3,295–£5,245
inc VAT, East Midlands guide

Two or three rooms replacing storage heaters.

Balanced choice

Bungalow or house

£4,745–£7,645
inc VAT, East Midlands guide

Four rooms on one outdoor unit.

Larger home

£6,645–£10,045
inc VAT, East Midlands guide

Five or more rooms or two outdoor units.

Prices are shown before any Boiler Upgrade Scheme grant. The £2,500 air-to-air grant applies only to eligible homes in England and Wales, using an MCS-certified heat pump installed by an MCS-certified installer, who applies for the grant and deducts it from the price. We confirm eligibility, and which installer applies, before you commit.

Guide prices show VAT at 20%. HMRC treats most fixed air conditioners and air-to-air heat pumps installed in homes as energy-saving materials, zero-rated until 31 March 2027 when we supply and fit them. If your installation qualifies, your quote shows 0% VAT and a lower price. Servicing, repairs, cleaning and controls are charged at 20%.

Planning and permissions

For most houses in Derby, the outdoor unit is permitted development if it passes the MCS 020(a) noise check (37 dB(A) or less at the nearest neighbouring window) and stays within the size and number limits. We run that check on survey.

Derby is in the Boiler Upgrade Scheme area, so eligible homes replacing oil, gas, LPG or electric heating may be able to get £2,500 off an air-to-air heat pump, as long as no fossil-fuel boiler stays in use. An MCS-certified installer must claim it; we confirm eligibility, and which installer applies, before you commit.

The survey

Surveys in Derby cover heat gain, pipe routes, electrics, access and noise to the nearest neighbour, so surprises on the day are rare. On a survey in Derby the engineer looks at room size, glazing, the route for pipes and drains, the electrics and where the outdoor unit can sit quietly, then the written quote follows.

What is included

Every job in Derby includes:

  • Air-to-air system sized for winter
  • Tariff and running advice
  • Commissioning and controls set-up
  • Boiler Upgrade Scheme eligibility check
  • Free survey and heat-loss calculation

Nearby

If you are just outside Derby, we also work in Belper (7 miles), Ilkeston (8 miles) and Heanor (8 miles). See all services in Derby or storage and electric heater replacement across Derbyshire.

FAQ

Common questions in Derby

Do you cover all of Derby?

Yes, including DE1. We also cover nearby Belper and Ilkeston.

Can I get a price for Derby without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

Who carries out the work in Derby?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

How long does the installation take in Derby?

Usually 2–4 days. We confirm the timing, and any days with no cooling or heating, in your written quote.

Can landlords use this to improve an EPC?

Replacing direct electric heating with a heat pump often improves an EPC rating. The exact change depends on the property, so ask a domestic energy assessor.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote