West Glamorgan

Heat load surveys and system design in Pontardawe

Before anything is fitted in Pontardawe, we work out how much heat each room gains and loses. The survey is free with an installation quote; standalone design packs are priced up front.

  • from £365Local guide price
  • Survey 1–2 hoursTypical time
  • West GlamorganArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Pontardawe

No two rooms in Pontardawe gain or lose heat in quite the same way, which is exactly why rooms are measured before sizing. South Wales summers can be warm and humid, and winters damp, so a reversible system earns its keep all year.

For self-builds and extensions in Pontardawe, a standalone design pack can go straight to your builder. Pontardawe lies roughly 8 miles from Swansea, and we cover it as part of West Glamorgan. Homes in SA8 are all within our coverage.

Prices in Pontardawe

In South and Mid Wales, our guide range for heat load surveys and system design is £365–£1,145 for a standalone design pack, including VAT. It is a touch below the UK middle, as trade rates in South and Mid Wales tend to be. A standalone design pack is priced on the size of the home, the number of rooms and how much drawing work your builder or architect needs. As an example, the Design pack option (drawings and schedules for one home) would typically be £365–£745 here.

Home survey

Free
inc VAT, South and Mid Wales guide

Free with an installation quote.

Balanced choice

Design pack

£365–£745
inc VAT, South and Mid Wales guide

Drawings and schedules for one home.

Self-build pack

£645–£1,145
inc VAT, South and Mid Wales guide

Whole-house design for a new build.

Planning and permissions

Since 1 June 2026, Welsh permitted development rules for outdoor units closely match England's: up to 1.5 m³, two units on a detached home, one on other homes, and MCS 020a noise compliance. Listed buildings need consent, and conservation areas have extra restrictions on units facing a road.

The survey

On a survey in Pontardawe the engineer looks at room size, glazing, the route for pipes and drains, the electrics and where the outdoor unit can sit quietly, then the written quote follows. A survey in Pontardawe usually takes one to two hours. We measure the rooms, check the walls and the consumer unit, agree the outdoor unit position with you and photograph the pipe routes.

What is included

Here is what is included on every job in Pontardawe:

  • Room-by-room heat gain and heat loss
  • Pipe and drain routes
  • Electrical load for your electrician
  • Noise check to the nearest neighbour
  • Written proposal with options

Nearby

Neighbouring places we cover include Clydach (3 miles), Neath (5 miles) and Ystradgynlais (5 miles). See all services in Pontardawe or heat load surveys and system design across West Glamorgan.

FAQ

Common questions in Pontardawe

How soon can you survey in Pontardawe?

We offer survey dates when you enquire. Early summer is the busiest time, so spring and autumn are the easiest times to book.

Who carries out the work in Pontardawe?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

How long does the installation take in Pontardawe?

Survey 1–2 hours. We confirm the timing, and any days with no cooling or heating, in your written quote.

Do you cover all of Pontardawe?

Yes, including SA8. We also cover nearby Clydach and Neath.

Will the outdoor unit need planning permission in Pontardawe?

Since 1 June 2026, most houses in Wales can have an outdoor unit under permitted development if it meets the size, number and MCS 020a noise conditions. Flats, listed buildings and conservation areas need more care. We check on survey.

Why can't you just quote from floor area?

Two rooms the same size can need very different units because of glazing, orientation and use. Sizing from floor area alone is the main cause of systems that never feel right.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote