Renfrewshire and Inverclyde

Heat load surveys and system design in Renfrew

Before anything is fitted in Renfrew, we work out how much heat each room gains and loses. The survey is free with an installation quote; standalone design packs are priced up front.

  • from £365Local guide price
  • Survey 1–2 hoursTypical time
  • Renfrewshire and InverclydeArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Renfrew

No two rooms in Renfrew gain or lose heat in quite the same way, which is exactly why rooms are measured before sizing. Mild Scottish summers mean cooling matters most in conservatories, lofts and rooms with large windows.

For self-builds and extensions in Renfrew, a standalone design pack can go straight to your builder. We cover Renfrew as part of Renfrewshire and Inverclyde, roughly 3 miles from Paisley. Homes in PA4 are all within our coverage.

Prices in Renfrew

Heat load surveys and system design in Renfrew typically come in at £365–£1,145 for a standalone design pack including VAT, based on Central and Southern Scotland rates. Labour rates in Central and Southern Scotland keep this slightly under the national middle. Larger homes, more zones and full drawing sets for a builder are what move a design pack towards the upper figure. Typical Design pack work (drawings and schedules for one home) lands around £365–£745 in this area.

Home survey

Free
inc VAT, Central and Southern Scotland guide

Free with an installation quote.

Balanced choice

Design pack

£365–£745
inc VAT, Central and Southern Scotland guide

Drawings and schedules for one home.

Self-build pack

£645–£1,145
inc VAT, Central and Southern Scotland guide

Whole-house design for a new build.

Planning and permissions

Scotland has its own permitted development rules for heat pumps and outdoor units, with stricter treatment of listed buildings and conservation areas. We check the current position for your property with you and, if needed, with the council.

The survey

On a survey in Renfrew the engineer looks at room size, glazing, the route for pipes and drains, the electrics and where the outdoor unit can sit quietly, then the written quote follows. At the survey we look at how each room is used, where the sun hits it and how the pipes can reach the outside wall, then put it all in a written quote.

What is included

Here is what is included on every job in Renfrew:

  • Noise check to the nearest neighbour
  • Written proposal with options
  • Equipment selection and outdoor unit sizing
  • Electrical load for your electrician
  • Pipe and drain routes

Nearby

We also cover Clydebank (2 miles), Erskine (3 miles) and Paisley (3 miles). See all services in Renfrew or heat load surveys and system design across Renfrewshire and Inverclyde.

FAQ

Common questions in Renfrew

How long does the installation take in Renfrew?

Survey 1–2 hours. We confirm the timing, and any days with no cooling or heating, in your written quote.

Can I get a price for Renfrew without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

Who carries out the work in Renfrew?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

Is the survey in Renfrew really free?

Yes, for new installations. The survey and written quote are free and there is no obligation to go ahead.

Will the outdoor unit need planning permission in Renfrew?

Scotland has its own permitted development rules for outdoor units, with stricter treatment of listed buildings and conservation areas. We confirm the position for your home on survey.

Why can't you just quote from floor area?

Two rooms the same size can need very different units because of glazing, orientation and use. Sizing from floor area alone is the main cause of systems that never feel right.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote