Northamptonshire

Heat load surveys and system design in Corby

Before anything is fitted in Corby, we work out how much heat each room gains and loses. The survey is free with an installation quote; standalone design packs are priced up front.

  • from £380Local guide price
  • Survey 1–2 hoursTypical time
  • NorthamptonshireArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Corby

In the East Midlands, one system that cools in summer and heats efficiently in winter makes good use of the investment. For self-builds and extensions in Corby, a standalone design pack can go straight to your builder.

Every Corby quote starts with a room-by-room survey rather than a guess from floor area. Corby sits around 19 miles from Northampton, inside our Northamptonshire area. We cover NN17 and the streets around them.

Prices in Corby

Our East Midlands guide price for heat load surveys and system design is £380–£1,195 for a standalone design pack, VAT included. Labour rates in the East Midlands keep this slightly under the national middle. Larger homes, more zones and full drawing sets for a builder are what move a design pack towards the upper figure. Typical Design pack work (drawings and schedules for one home) lands around £380–£745 in this area.

Home survey

Free
inc VAT, East Midlands guide

Free with an installation quote.

Balanced choice

Design pack

£380–£745
inc VAT, East Midlands guide

Drawings and schedules for one home.

Self-build pack

£645–£1,195
inc VAT, East Midlands guide

Whole-house design for a new build.

Planning and permissions

England's rules let most houses fit an outdoor unit without a planning application, as long as the size, number and MCS 020(a) noise conditions are met. Flats, listed buildings and roof-mounted units are treated differently.

The survey

At the survey we look at how each room is used, where the sun hits it and how the pipes can reach the outside wall, then put it all in a written quote. A survey in Corby usually takes one to two hours. We measure the rooms, check the walls and the consumer unit, agree the outdoor unit position with you and photograph the pipe routes.

What is included

Every job in Corby includes:

  • Equipment selection and outdoor unit sizing
  • Pipe and drain routes
  • Written proposal with options
  • Electrical load for your electrician
  • Noise check to the nearest neighbour

Nearby

Neighbouring places we cover include Uppingham (6 miles), Desborough (7 miles) and Kettering (7 miles). See all services in Corby or heat load surveys and system design across Northamptonshire.

FAQ

Common questions in Corby

Do you cover all of Corby?

Yes, including NN17. We also cover nearby Uppingham and Desborough.

How long does the installation take in Corby?

Survey 1–2 hours. We confirm the timing, and any days with no cooling or heating, in your written quote.

Who carries out the work in Corby?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

How much do heat load surveys and system design cost in Corby?

Our guide range in the East Midlands is £380–£1,195 for a standalone design pack, including VAT. The exact price depends on the rooms, the pipe route and access, and we confirm it in writing after a free survey.

Do I get the calculations?

Your quote shows the capacity chosen for each room. Standalone design packs include the full calculations.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote