Mid Glamorgan

Heat load surveys and system design in Caerphilly

Planning a new system in Caerphilly? A heat load survey sizes every room properly before any equipment is chosen, and it is free with every installation quote.

  • from £365Local guide price
  • Survey 1–2 hoursTypical time
  • Mid GlamorganArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Caerphilly

Wet South Wales winters make a heat pump's quiet, even heating and dehumidifying mode useful well beyond summer. No two rooms in Caerphilly gain or lose heat in quite the same way, which is exactly why rooms are measured before sizing.

Every Caerphilly quote starts with a room-by-room survey rather than a guess from floor area. Our Mid Glamorgan coverage takes in Caerphilly, about 16 miles from Bridgend. Homes in CF83 are all within our coverage.

Prices in Caerphilly

In South and Mid Wales, our guide range for heat load surveys and system design is £365–£1,145 for a standalone design pack, including VAT. Labour rates in South and Mid Wales keep this slightly under the national middle. Larger homes, more zones and full drawing sets for a builder are what move a design pack towards the upper figure. As an example, the Design pack option (drawings and schedules for one home) would typically be £365–£745 here.

Home survey

Free
inc VAT, South and Mid Wales guide

Free with an installation quote.

Balanced choice

Design pack

£365–£745
inc VAT, South and Mid Wales guide

Drawings and schedules for one home.

Self-build pack

£645–£1,145
inc VAT, South and Mid Wales guide

Whole-house design for a new build.

Planning and permissions

Since 1 June 2026, Welsh permitted development rules for outdoor units closely match England's: up to 1.5 m³, two units on a detached home, one on other homes, and MCS 020a noise compliance. Listed buildings need consent, and conservation areas have extra restrictions on units facing a road.

The survey

The free survey is where the real price is set: room measurements, pipe and drain routes, electrical checks and the outdoor unit position, all written into your quote. We book surveys in Caerphilly at a time that suits you, including early evenings by arrangement, and send the written quote afterwards.

What is included

Included with heat load surveys and system design in Caerphilly:

  • Pipe and drain routes
  • Noise check to the nearest neighbour
  • Room-by-room heat gain and heat loss
  • Equipment selection and outdoor unit sizing
  • Electrical load for your electrician

Nearby

If you are just outside Caerphilly, we also work in Risca (6 miles), Pontypridd (6 miles) and Gelligaer (6 miles). See all services in Caerphilly or heat load surveys and system design across Mid Glamorgan.

FAQ

Common questions in Caerphilly

Can I get a price for Caerphilly without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

How much do heat load surveys and system design cost in Caerphilly?

Our guide range in South and Mid Wales is £365–£1,145 for a standalone design pack, including VAT. The exact price depends on the rooms, the pipe route and access, and we confirm it in writing after a free survey.

Will the outdoor unit need planning permission in Caerphilly?

Since 1 June 2026, most houses in Wales can have an outdoor unit under permitted development if it meets the size, number and MCS 020a noise conditions. Flats, listed buildings and conservation areas need more care. We check on survey.

Is the survey in Caerphilly really free?

Yes, for new installations. The survey and written quote are free and there is no obligation to go ahead.

Who carries out the work in Caerphilly?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

Do I get the calculations?

Your quote shows the capacity chosen for each room. Standalone design packs include the full calculations.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote