Kent

Heat load surveys and system design in Ashford, Kent

Heat load surveys and system design for homes in Ashford, Kent: room-by-room calculations, equipment selection and a written proposal, free with an installation quote.

  • from £495Local guide price
  • Survey 1–2 hoursTypical time
  • KentArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Ashford, Kent

For self-builds and extensions in Ashford, a standalone design pack can go straight to your builder. In the South East, loft rooms and glazed extensions can climb well above the outside temperature on a sunny afternoon.

Every Ashford quote starts with a room-by-room survey rather than a guess from floor area. Ashford, Kent sits around 18 miles from Maidstone, inside our Kent area. Coverage includes TN24.

Prices in Ashford, Kent

For Ashford, Kent, expect roughly £495 to £1,495 for a standalone design pack, VAT included, adjusted for typical South East England rates. Prices here sit above the national middle, reflecting South East England labour rates and parking and access costs. The design pack price depends mainly on the number of rooms and whether full drawings and equipment schedules are needed. On our South East England figures, the Design pack option (drawings and schedules for one home) is about £495–£945.

Home survey

Free
inc VAT, South East England guide

Free with an installation quote.

Balanced choice

Design pack

£495–£945
inc VAT, South East England guide

Drawings and schedules for one home.

Self-build pack

£845–£1,495
inc VAT, South East England guide

Whole-house design for a new build.

Planning and permissions

Since 29 May 2025, England's permitted development rules allow larger outdoor units (up to 1.5 m³) and no longer require a 1 m gap to the boundary, provided the MCS 020(a) noise check is met. Listed buildings and pitched-roof installs still need permission.

The survey

A survey in Ashford usually takes one to two hours. We measure the rooms, check the walls and the consumer unit, agree the outdoor unit position with you and photograph the pipe routes. At the survey we look at how each room is used, where the sun hits it and how the pipes can reach the outside wall, then put it all in a written quote.

What is included

Here is what is included on every job in Ashford:

  • Electrical load for your electrician
  • Pipe and drain routes
  • Noise check to the nearest neighbour
  • Written proposal with options
  • Room-by-room heat gain and heat loss

Nearby

Close to Ashford, our coverage also includes Faversham (12 miles), Canterbury (13 miles) and Folkestone (13 miles). See all services in Ashford, Kent or heat load surveys and system design across Kent.

FAQ

Common questions in Ashford, Kent

How long does the installation take in Ashford, Kent?

Survey 1–2 hours. We confirm the timing, and any days with no cooling or heating, in your written quote.

Can I get a price for Ashford, Kent without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

Is the survey in Ashford, Kent really free?

Yes, for new installations. The survey and written quote are free and there is no obligation to go ahead.

How much do heat load surveys and system design cost in Ashford, Kent?

Our guide range in South East England is £495–£1,495 for a standalone design pack, including VAT. The exact price depends on the rooms, the pipe route and access, and we confirm it in writing after a free survey.

How long does a survey take?

One to two hours for most homes.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote