Greater Manchester

Heat load surveys and system design in Royton

Planning a new system in Royton? A heat load survey sizes every room properly before any equipment is chosen, and it is free with every installation quote.

  • from £375Local guide price
  • Survey 1–2 hoursTypical time
  • Greater ManchesterArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Royton

No two rooms in Royton gain or lose heat in quite the same way, which is exactly why rooms are measured before sizing. North West summers are cooler, so many systems here earn their keep as efficient heaters, with cooling for the warmest weeks.

For self-builds and extensions in Royton, a standalone design pack can go straight to your builder. Royton lies roughly 7 miles from Manchester, and we cover it as part of Greater Manchester. Coverage includes OL2.

Prices in Royton

Budget around £375–£1,195 for a standalone design pack including VAT for heat load surveys and system design in and around Royton. That sits a little below the UK middle, reflecting typical North West England labour rates. Larger homes, more zones and full drawing sets for a builder are what move a design pack towards the upper figure. As an example, the Design pack option (drawings and schedules for one home) would typically be £375–£745 here.

Home survey

Free
inc VAT, North West England guide

Free with an installation quote.

Balanced choice

Design pack

£375–£745
inc VAT, North West England guide

Drawings and schedules for one home.

Self-build pack

£645–£1,195
inc VAT, North West England guide

Whole-house design for a new build.

Planning and permissions

Since 29 May 2025, England's permitted development rules allow larger outdoor units (up to 1.5 m³) and no longer require a 1 m gap to the boundary, provided the MCS 020(a) noise check is met. Listed buildings and pitched-roof installs still need permission.

The survey

A survey in Royton usually takes one to two hours. We measure the rooms, check the walls and the consumer unit, agree the outdoor unit position with you and photograph the pipe routes. The free survey is where the real price is set: room measurements, pipe and drain routes, electrical checks and the outdoor unit position, all written into your quote.

What is included

Every job in Royton includes:

  • Electrical load for your electrician
  • Written proposal with options
  • Room-by-room heat gain and heat loss
  • Pipe and drain routes
  • Equipment selection and outdoor unit sizing

Nearby

Close to Royton, our coverage also includes Chadderton (2 miles), Oldham (2 miles) and Middleton (3 miles). See all services in Royton or heat load surveys and system design across Greater Manchester.

FAQ

Common questions in Royton

How much do heat load surveys and system design cost in Royton?

Our guide range in North West England is £375–£1,195 for a standalone design pack, including VAT. The exact price depends on the rooms, the pipe route and access, and we confirm it in writing after a free survey.

Will the outdoor unit need planning permission in Royton?

Most houses can have an outdoor unit under permitted development if it meets the size, number and MCS 020(a) noise conditions. Flats and listed buildings usually need permission or consent. We check on survey.

Can I get a price for Royton without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

Who carries out the work in Royton?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

Do you cover all of Royton?

Yes, including OL2. We also cover nearby Chadderton and Oldham.

Why can't you just quote from floor area?

Two rooms the same size can need very different units because of glazing, orientation and use. Sizing from floor area alone is the main cause of systems that never feel right.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote