East Sussex

Heat load surveys and system design in Seaford

Before anything is fitted in Seaford, we work out how much heat each room gains and loses. The survey is free with an installation quote; standalone design packs are priced up front.

  • from £495Local guide price
  • Survey 1–2 hoursTypical time
  • East SussexArea
Heat load surveys and system design in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Heat load surveys and system design in Seaford

Every Seaford quote starts with a room-by-room survey rather than a guess from floor area. Hot spells reach the South East early, which makes spring the easiest time to arrange an installation.

No two rooms in Seaford gain or lose heat in quite the same way, which is exactly why rooms are measured before sizing. Seaford is about 11 miles from Brighton and falls within our East Sussex coverage. We cover BN25 and the streets around them.

Prices in Seaford

Guide prices around Seaford run from £495 to £1,495 for a standalone design pack including VAT. That is above the UK middle, mainly because labour and access cost more in South East England. The design pack price depends mainly on the number of rooms and whether full drawings and equipment schedules are needed. Typical Design pack work (drawings and schedules for one home) lands around £495–£945 in this area.

Home survey

Free
inc VAT, South East England guide

Free with an installation quote.

Balanced choice

Design pack

£495–£945
inc VAT, South East England guide

Drawings and schedules for one home.

Self-build pack

£845–£1,495
inc VAT, South East England guide

Whole-house design for a new build.

Planning and permissions

Since 29 May 2025, England's permitted development rules allow larger outdoor units (up to 1.5 m³) and no longer require a 1 m gap to the boundary, provided the MCS 020(a) noise check is met. Listed buildings and pitched-roof installs still need permission.

The survey

At the survey we look at how each room is used, where the sun hits it and how the pipes can reach the outside wall, then put it all in a written quote. The free survey is where the real price is set: room measurements, pipe and drain routes, electrical checks and the outdoor unit position, all written into your quote.

What is included

What a job in Seaford covers:

  • Room-by-room heat gain and heat loss
  • Noise check to the nearest neighbour
  • Written proposal with options
  • Pipe and drain routes
  • Electrical load for your electrician

Nearby

Close to Seaford, our coverage also includes Rottingdean (8 miles), Eastbourne (8 miles) and Hailsham (9 miles). See all services in Seaford or heat load surveys and system design across East Sussex.

FAQ

Common questions in Seaford

Do you cover all of Seaford?

Yes, including BN25. We also cover nearby Rottingdean and Eastbourne.

Who carries out the work in Seaford?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

Can I get a price for Seaford without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

Will the outdoor unit need planning permission in Seaford?

Most houses can have an outdoor unit under permitted development if it meets the size, number and MCS 020(a) noise conditions. Flats and listed buildings usually need permission or consent. We check on survey.

How much do heat load surveys and system design cost in Seaford?

Our guide range in South East England is £495–£1,495 for a standalone design pack, including VAT. The exact price depends on the rooms, the pipe route and access, and we confirm it in writing after a free survey.

Why can't you just quote from floor area?

Two rooms the same size can need very different units because of glazing, orientation and use. Sizing from floor area alone is the main cause of systems that never feel right.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote