Bedfordshire

Storage and electric heater replacement in Bedford

If you are weighing up storage and electric heater replacement for your home in Bedford, the first step is a free survey, followed by a written quote you can compare with anyone else's.

  • from £3,845Local guide price
  • Usually 2–4 daysTypical time
  • BedfordshireArea
Storage and electric heater replacement in a home
  • Free survey and written quote
  • Refrigerant work by F-gas certified engineers
  • Price fixed in writing
  • England, Scotland, Wales and NI
  • Cools in summer, heats in winter

Storage and electric heater replacement in Bedford

Old storage heaters in Bedford homes are removed and recycled as part of the replacement. Long sunny spells in the East of England put conservatories and top-floor rooms under real pressure.

Flats and bungalows in Bedford that have never had gas are the usual candidates for replacing storage heaters. Our Bedfordshire coverage takes in Bedford, about 18 miles from Luton. Homes in MK40 are all within our coverage.

Prices in Bedford

For Bedford, expect roughly £3,845 to £11,695 for 3–5 rooms, VAT included, adjusted for typical East of England rates. Prices here sit above the national middle, reflecting East of England labour rates and parking and access costs. Longer or hidden pipe runs, high-level brackets and electrical upgrades are the usual reasons a quote lands at the top of the range. As an example, the Bungalow or house option (four rooms on one outdoor unit) would typically be £5,545–£8,895 here.

Small flat

£3,845–£6,095
inc VAT, East of England guide

Two or three rooms replacing storage heaters.

Balanced choice

Bungalow or house

£5,545–£8,895
inc VAT, East of England guide

Four rooms on one outdoor unit.

Larger home

£7,795–£11,695
inc VAT, East of England guide

Five or more rooms or two outdoor units.

Prices are shown before any Boiler Upgrade Scheme grant. The £2,500 air-to-air grant applies only to eligible homes in England and Wales, using an MCS-certified heat pump installed by an MCS-certified installer, who applies for the grant and deducts it from the price. We confirm eligibility, and which installer applies, before you commit.

Guide prices show VAT at 20%. HMRC treats most fixed air conditioners and air-to-air heat pumps installed in homes as energy-saving materials, zero-rated until 31 March 2027 when we supply and fit them. If your installation qualifies, your quote shows 0% VAT and a lower price. Servicing, repairs, cleaning and controls are charged at 20%.

Planning and permissions

Since 29 May 2025, England's permitted development rules allow larger outdoor units (up to 1.5 m³) and no longer require a 1 m gap to the boundary, provided the MCS 020(a) noise check is met. Listed buildings and pitched-roof installs still need permission.

Bedford is in the Boiler Upgrade Scheme area, so eligible homes replacing oil, gas, LPG or electric heating may be able to get £2,500 off an air-to-air heat pump, as long as no fossil-fuel boiler stays in use. An MCS-certified installer must claim it; we confirm eligibility, and which installer applies, before you commit.

The survey

Surveys in Bedford cover heat gain, pipe routes, electrics, access and noise to the nearest neighbour, so surprises on the day are rare. The free survey is where the real price is set: room measurements, pipe and drain routes, electrical checks and the outdoor unit position, all written into your quote.

What is included

Every job in Bedford includes:

  • Tariff and running advice
  • Disconnection and removal of old heaters
  • Free survey and heat-loss calculation
  • Air-to-air system sized for winter
  • Boiler Upgrade Scheme eligibility check

Nearby

If you are just outside Bedford, we also work in Sandy (8 miles), Flitwick (9 miles) and Biggleswade (9 miles). See all services in Bedford or storage and electric heater replacement across Bedfordshire.

FAQ

Common questions in Bedford

Can I get a price for Bedford without a visit?

Yes, our online guide price tool gives a range in about a minute. A fixed price needs a survey, which is free for new installations.

How long does the installation take in Bedford?

Usually 2–4 days. We confirm the timing, and any days with no cooling or heating, in your written quote.

Is the survey in Bedford really free?

Yes, for new installations. The survey and written quote are free and there is no obligation to go ahead.

Who carries out the work in Bedford?

F-gas certified engineers working for Aircon Installers. Your contract is with S&K Property Investments and Improvement Ltd, which trades as Aircon Installers, and your quote names who will do the work and the F-gas company certificate that covers it.

Do I lose my Economy 7 tariff?

You can stay on it or switch. Heat pumps run when heat is needed, so many households move to a standard or smart tariff.

Next step

Ready for a cooler summer and a cheaper winter?

Book a survey, or get a guide price in about a minute with our online tool.

Starting a live chat loads Tawk.to, which sets its own cookies. Cookie policy.

CallGet a quote